8 Best Medline Transport Chair Replacement Parts (November 2026)
The best Medline transport chair replacement parts include the ComsenMed Universal 14” Full Arm Pad for full length arm support, the Wiykkur 12 Inch Wheelchair Wheels Replacement for rear wheel replacement, and the ForconMed Blue Streak Wheelchair footrest Replacement for swing away footrests.
On this page (10 sections)
- Best Medline transport chair replacement parts by job
- How we compared these parts
- The replacement parts, highest score first
- How to match Medline transport chair parts by size
- Medline transport chair replacement wheels: what to check first
- How to replace arm pads without guessing
- Footrests, hanger pins and forks: small parts that matter
- Are universal parts safe for a Medline chair
- What parts of a chair do owners replace most
- Verdict: which Medline replacement parts to buy first
The best Medline transport chair replacement parts start with correct measurements, not brand labels alone. Wheels, forks, footrests and arm pads are the parts owners swap most.
Each one has a size number that must match your chair.
Transport chairs take daily use in homes, clinics and travel. Tires wear flat, arm pads crack, footrests swing loose and small pins go missing.
A correct part can extend the life of a chair that otherwise works well.
We compared specs, sizes and fit notes across these eight parts. We did not test them by hand.
Scores weigh specs, features and fit clarity against what a Medline owner needs.
Our score reflects how well each part fits the search for compatible wheels and other replacement components. A higher score means clearer fit details and broader size options.
If you are still choosing a chair, our best wheelchairs for adults guide helps you compare full size models. For broader part ideas, see best transport chair replacement parts.
Our picks at a glance
-
1
Best for full length arm supportComsenMed Universal 14” Full Arm Pad
9.7/10 our score
See it on Amazon -
2
Best for rear wheel replacementWiykkur 12 Inch Wheelchair Wheels Replacement
9.6/10 our score
See it on Amazon -
3
Best for swing away footrestsForconMed Blue Streak Wheelchair footrest Replacement
9.3/10 our score
See it on Amazon
- 4
Check itComsenMed Universal Wheelchair footrest Hanger pins
Best for lost hanger pins - 5
Check itAlveyTech 8" Rear Caster Wheel for Drive
Best for 8 inch caster swaps - 6
Check itHMZ Full Length Padded Armrest Black 10-1/4"
Best for padded arm comfort - 7
Check itAlveyTech 10" Desk Length Vinyl Armrest Pads
Best for desk length fit - 8
Check itForconMed 8 Inch Steel Wheel Fork Universal
Best for front caster forks
Best Medline transport chair replacement parts by job
The top pick is the ComsenMed 14 inch arm pad. It has the widest hole spacing range in this group.
The Wiykkur rear wheels score next for a true pair swap.
Each part below solves one wear point. Read the size numbers first, then the trade offs.
That order helps you match a Medline chair without guesswork.
The group covers four jobs that cause most service calls. Wheels affect rolling, arm pads affect comfort, footrests affect support and forks affect steering.
Naming the job first narrows the search fast.
A Medline chair in daily use can need more than one part at the same time. Tires and pads often wear together after months of use.
Checking the whole chair during one swap saves a second order later.
How we compared these parts
We checked each part by size, count, material and stated fit. Then we compared how clearly the fit numbers are given.
Parts with more spacing options scored higher for Medline owners.
We also weighed practical details. Hardware included, bearings installed and pair packaging all reduce work.
Trade offs still matter, such as model limits or extra measurements required.
Material notes matter for daily care. Vinyl and PU leather wipe clean, polyurethane tires resist wear and steel forks resist bending.
Those details help predict how a part will behave in a home or clinic.
Packaging matters too. A pair gives even wear and a spare for later.
A single wheel suits a single damaged caster when the other side still rolls well.
What we did not do
We did not run hands on tests in homes or clinics. We rely on maker specs and buyer patterns.
When a maker states a fit limit, we pass that limit on plainly.
We also did not assume a part fits a Medline model unless the maker stated broad compatibility. Narrow model lists stayed narrow in our scoring.
That choice keeps readers from ordering on a guess.
The replacement parts, highest score first
ComsenMed Universal 14” Full Arm Pad: Best for full length arm support
- 14 in full length arm pad
- Hole spacings 2, 6.8, 8.9 or 10 in
- Vinyl with foam padding
- Hardware included
- Sold as a pair in black
A full length 14 inch pad that fits many hole patterns. It suits Medline and other transport chairs when the mounting holes line up.
Pros
- Four hole spacing options
- Hardware included for install
- Foam padded vinyl surface
Cons
- Not for power chairs
- Must confirm hole spacing before order
This pad suits owners whose arm pads are worn, cracked or flattened. The 14 inch full length gives long support for forearms during longer rides and travel.
It offers four hole spacings: 2, 6.8, 8.9 and 10 inches. That range covers many Medline and other transport chairs.
Measure center to center on your old pad before you order, and confirm the frame holes match one of those numbers.
The vinyl surface wipes clean, and foam sits under the cover for cushion. The black base and included hardware mean install is mostly removing old screws and fitting the new pad.
At 13.86 by 2.11 by 1.42 inches and under 12 ounces for the set, it stays light on the frame.
Trade off: it is not for power chairs. It also does not fix a bent armrest frame.
Check the frame first, then swap the pad.
Wiykkur 12 Inch Wheelchair Wheels Replacement: Best for rear wheel replacement
- 12.5 x 2.25 in rear wheel assembly
- Pair included
- Polyurethane tire and polypropylene hub
- 6201 bearing
- Bolts and wrenches included
A pair of 12 inch rear wheels for manual transport chairs. The solid tire avoids flats, and the size checks decide fit.
Pros
- Sold as a pair
- Solid polyurethane tire
- Installation hardware included
Cons
- Manual chairs only
- Must match three key dimensions
These wheels suit owners with worn rear tires on a manual transport chair. The 12.5 x 2.25 inch solid tire resists flats that pneumatic tires can get.
You get a pair, plus bolts and wrenches for install. The hub uses polypropylene, and the bearing is a 6201 type.
That mix aims for smooth rolling with low upkeep, and the polyurethane tire holds up to frequent indoor and outdoor use.
Fit depends on three numbers. Check wheel diameter of 11.8 inches, axle head length of 2.18 inches and bearing hole of 0.47 inches.
All three must match your chair. The listed screw length of 4 inches and tire width of 1.73 inches are useful checks during the swap.
Trade off: electric wheelchairs are not supported. This is a manual chair part only, by design.
ForconMed Blue Streak Wheelchair footrest Replacement: Best for swing away footrests
- Pair of swing away footrests
- Blue with composite footplates
- Heel loops included
- 1.46 in hinge bracket spacing
- Tool free push button adjustment
Swing away footrests with heel loops for standard chairs. The 1.46 inch spacing is the number to check on your Medline chair.
Pros
- Heel loops help hold feet in place
- Tool free length adjustment
- Sold as a left and right pair
Cons
- Color may differ from your chair
- Requires 1.46 in spacing match
These footrests suit owners with loose, cracked or missing swing away footrests. The composite footplate with heel loop helps keep feet from sliding back during transfers.
The key number is 1.46 inches between swingaway hinge brackets. Measure that spacing on your Medline chair.
If it matches, this pair is a direct style swap for standard wheelchairs and transport chairs. The design aligns with Drive PH-SF and T93 in function and structure.
Length adjusts with a push button, so no tools are needed for height changes. That helps with fit for different leg lengths.
The cam lock design fits standard chairs, and the assembly is sold as a left and right pair in blue.
Trade off: blue may not match your chair color exactly. Color is cosmetic, but measure spacing first since that decides function.
ComsenMed Universal Wheelchair footrest Hanger pins: Best for lost hanger pins
- 4 pins, 4 washers and 4 nuts
- For steel and aluminum chairs
- Fits most transport chairs
- Easy install when a pin is lost
Small pins that let a footrest pivot again. A low cost fix when a pin is lost or damaged.
Pros
- Complete pin, washer and nut sets
- Fits many chair brands
- Simple install
Cons
- Does not repair a bent bracket
- Confirm pin fit on your frame
These pins suit owners who lost a footrest hanger pin. The four pins with washers and nuts give you a full set for one chair.
The pin mounts to moon shaped brackets at the front of the frame. That mount lets the leg rest pivot for swing away motion.
A missing pin can make a footrest unsafe to use, so this small part restores normal movement fast.
This is a small, low cost fix. It works with most steel and aluminum transport chairs when the pin size matches.
Four complete sets cover both sides and leave spares in the drawer. The whole kit weighs under an ounce, so storage is easy.
Trade off: pins will not straighten a bent bracket. Inspect the bracket before you install a new pin set.
AlveyTech 8" Rear Caster Wheel for Drive: Best for 8 inch caster swaps
- 8 in black urethane wheel
- 3 spoke design
- 608ZZ bearings pre installed
- Spacer pre installed
- Sold individually
An 8 inch caster wheel with bearings and spacer ready to fit. It suits specific Drive models, so check your model number.
Pros
- Bearings and spacer pre installed
- Anti skid urethane tire
- Quick swap design
Cons
- Sold as one wheel
- Made for listed Drive models
This wheel suits owners replacing a worn 8 inch caster on a listed Drive model. The 8 inch black urethane tire is made for rollators and transport chairs.
Bearings and a spacer come pre installed. That cuts swap time and helps the wheel seat correctly.
The 3 spoke design keeps weight low at 1.1 pounds. The anti skid tire aims for smooth rolling on indoor and outdoor surfaces.
Fit is narrow by design. It is made for the Drive Duet Rollator/Transport Chair 795 and D-Lite Rollator 750N, with manufacturer part number 9501A75008.
Check your model number before you order for a Medline chair, since this is not a broad universal caster.
Trade off: it is sold as one wheel. Replacing both rear casters at once gives more even rolling.
HMZ Full Length Padded Armrest Black 10-1/4": Best for padded arm comfort
- 10.25 in length
- Hole spacings 3-7/8 or 6-3/4 in
- PU leather over foam
- Hardware included
- 1 pair in black
A softer padded armrest in a shorter 10.25 inch length. It suits users who want more cushion under elbows and forearms.
Pros
- Soft foam padded surface
- Wipe clean PU leather
- Hardware included
Cons
- Shorter than 14 in pads
- Not for electric chairs
This armrest suits owners who want a softer pad than standard vinyl. The 10.25 inch length is shorter than full length pads, which can suit smaller chairs.
It uses PU leather over foam, with a soft feel and memory foam fill noted in the specs. That can give more cushion for elbows and forearms on daily rides.
The waterproof surface also wipes clean after spills or clinic use.
Two hole spacings are offered: 3-7/8 and 6-3/4 inches. Measure your old pad and pick the match.
Hardware is included for install, with four bolts supplied. The makers list Medline, Drive, Guardian, Lumex and others as compatible for manual chairs.
Trade off: shorter length means less support than a 14 inch pad. It is also not for electric chairs.
AlveyTech 10" Desk Length Vinyl Armrest Pads: Best for desk length fit
- 10 in desk length
- Hole spacings 3.5, 6 or 6.5 in
- Black vinyl with padded cushion
- Hardware included
- Sold as a pair
Desk length pads that let a chair slide closer to a table. The three hole spacing options help match many Drive and transport chairs.
Pros
- Desk length design
- Three spacing options
- Easy clean vinyl
Cons
- Fits many Drive models, not all chairs
- Confirm spacing before order
These pads suit owners who need desk length arms. The 10 inch desk length lets a chair move closer to a table or desk edge.
Three hole spacings give fit options: 3.5, 6 and 6.5 inches. Hardware is included, and the pads come as a pair.
That pairing lets you refresh both sides at once or save one pad for later.
Black vinyl wipes clean and stands up to daily use. Foam padding inside adds comfort for arms and elbows.
The same maker part number STDSDSKVB ties this pair to many Drive Medical wheelchair and transport chair models.
Trade off: fit is stated for many Drive models. Measure a Medline chair carefully, since spacing and length must both match.
ForconMed 8 Inch Steel Wheel Fork Universal: Best for front caster forks
- Pair of steel forks
- For 8 in wheels
- Fork gap 2.5 in
- Stem shaft 1/2 in
- Caster hole 5/16 in
- Nuts included
Steel front forks for 8 inch caster wheels. Measure the stem shaft and fork gap, since those numbers decide fit on a Medline chair.
Pros
- Steel construction
- Stem bolt attached
- Sold as a pair with nuts
Cons
- Forks only, wheels separate
- Must measure shaft size
These forks suit owners with bent or worn front caster forks. The steel fork for 8 inch wheels supports the caster wheel and stem bolt.
Measure three numbers before you order. They are fork gap of 2.5 inches, stem shaft of 1/2 inch and caster hole of 5/16 inch.
The mounting hole, inner width and shaft diameter must all line up with your chair.
The stem bolt comes attached, which simplifies install. Keep your spacers when you swap, since you may need them again.
The pair comes in black with nuts included, and the makers list Blue Streak, Silver Sport and Guardian models among the fits.
Trade off: forks do not include wheels. If your caster tires are worn too, plan both swaps together.
How to match Medline transport chair parts by size
Direct answer: measure the old part, then match that number on the new part. Wheel diameter, hole spacing and stem size do most of the work.
Start with the part that failed. A flat rear tire points to wheel size.
A loose footrest points to hinge spacing. A cracked arm pad points to hole spacing.
Write each number down before you shop. Photos help, but numbers decide fit.
Keep the old part until the new one rolls or pivots smoothly.
A tape measure and a notebook handle most checks. Measure while the chair sits on a flat floor.
That position shows how the part truly sits under load.
How to measure hole spacing
Hole spacing is the distance between mounting holes, center to center. Use inches and match the closest listed option.
If your holes fall between two options, do not force it. A mismatch can make a pad sit crooked or wobble.
Arm pads in this group show the range clearly. Options run from 2 inches up to 10 inches across different models.
Your chair will match one of those numbers or none of them.
How to measure wheel and stem size
Wheel size is the outside diameter. Stem size is the shaft that enters the frame.
Both must match your chair.
For forks, also check fork gap. That gap must fit your caster wheel width.
Rear wheels add a third check. Axle head length and bearing hole must match the frame.
Skipping one check often leaves a wheel that binds or wobbles.
Medline transport chair replacement wheels: what to check first
Direct answer: check diameter, axle length and bearing hole before you buy wheels. Those three numbers decide if a wheel will fit and roll true.
Rear wheels on transport chairs are often near 12 inches. Front casters are often near 8 inches.
Confirm your size rather than guessing from looks.
Solid tires resist flats. Urethane tires roll smoothly and need less care.
Either type still needs correct fit to work well.
For wheel focused shopping, our best transport chair replacement wheels guide compares more options. Pair swaps usually give the smoothest result.
Wheel wear shows in flat spots, cracks and noisy bearings. Spin each wheel by hand and listen for grinding.
That simple check points to a bearing swap or a full wheel swap.
Hub material affects long term use. Polypropylene hubs resist impact and stay light.
Steel forks pair with those hubs for strength at the front.
Should you replace one wheel or a pair
Replace both sides when both tires show wear. Matching wheels help the chair track straight during turns.
If only one wheel is damaged, check the other side closely. A second worn tire often fails soon after the first.
A pair also keeps rolling resistance even on both sides. That evenness matters on ramps and tight turns.
It also gives you a clean baseline for future checks.
How to replace arm pads without guessing
Direct answer: match length and hole spacing, then swap pads with the included hardware. That is the whole job for most arm pads.
Full length pads give more forearm support. Desk length pads let the chair get closer to tables.
Choose the length your chair and routine need.
If you want help learning chair layout first, our medline transport chair assembly guide walks through setup steps.
Pads take constant contact from arms and clothing. Vinyl resists moisture and wipes clean.
PU leather adds a softer feel with similar care.
Foam under the cover changes comfort more than the cover itself. Thicker foam cushions elbows on long rides.
Thinner foam suits users who prefer a firm rest.
Full length versus desk length pads
Full length pads run about 14 inches in this group. Desk length pads run about 10 inches.
Pick full length for longer rides and more support. Pick desk length for tables, desks and tighter indoor spaces.
Length also affects transfers. A longer pad can support the arm during a lift.
A shorter pad leaves more room to grip the frame.
Footrests, hanger pins and forks: small parts that matter
Direct answer: small parts keep footrests and casters safe and smooth. Check spacing, pin fit and stem size on each one.
Footrest hinge spacing is often near 1.46 inches. Hanger pins let the leg rest pivot on the frame.
Forks hold front caster wheels in place.
A bent fork or stem can make a chair hard to steer. Replace the fork assembly if the stem is not straight.
Keep spacers for reinstall.
For a brand specific view, see best drive transport chair parts and compare fit notes across brands.
Footrests carry weight at the front of the chair. A cracked plate can shift under the feet.
Heel loops reduce that sliding risk during movement.
Forks take steering load on every turn. A stem that is not at 90 degrees to the ground will pull the chair to one side.
That pull is a clear sign to replace the assembly.
When a small part needs full replacement
Replace a pin when it is lost or damaged. Replace a footrest when the plate or hinge is cracked.
Replace a fork when the stem is bent. Small parts affect safety, so do not delay a swap.
Pins are cheap and fast to fit. Footrests and forks cost more but restore safe pivoting and steering.
Doing the swap early avoids a fall or a stranded trip.
Are universal parts safe for a Medline chair
Direct answer: yes, when sizes match exactly. Universal means shared sizes, not guaranteed fit for every chair.
Many Medline transport chairs use common industry sizes. That is why universal wheels, pads and footrests can work well.
Still, measure first every time. One wrong number can stop a part from seating or rolling.
If you are comparing chair types, our best transport chair big wheels guide explains larger wheel trade offs.
Universal parts often list several spacing options. That list reflects shared industry standards.
It does not mean your exact model is included.
Brand labels can mislead when sizes are shared. A Drive part can fit a Medline chair if numbers match.
A Medline part can fit another brand for the same reason.
The five minute fit check
Measure diameter, spacing and stem size on the old part. Write the numbers down.
Compare them with the new part before you order.
That check takes less time than returning a wrong part. It also helps you ask better questions if you need help.
Keep the old part beside the new one during install. Line up holes and shafts before tightening anything.
That dry fit shows a mismatch early.
What parts of a chair do owners replace most
Direct answer: owners replace wheels, arm pads, footrests and caster forks most often. Those parts wear from daily rolling and contact.
Naming parts helps when you shop. Our guide on What Are the Parts of a Rollator Called? explains shared mobility terms you may see in part names.
For a different mobility aid, see What Is a Three Wheel Rollator Good For? to compare features and use cases.
Wheels wear from miles and weight. Arm pads wear from pressure and cleaning.
Footrests wear from steps and transfers.
Forks wear from curbs and turns. Small pins wear from repeated swinging of the footrest.
Each wear type points to a different part in this list.
Recording part numbers helps future orders. A photo of the label or a note with dimensions saves time later.
That habit also helps when you ask a shop for advice.
How often should you check wear
Check tires, pads and footrests every few months. Look for flat spots, cracks, looseness and bent stems.
Early swaps are cheaper and safer than a failure on a trip. Keep part numbers with your chair records.
A quick monthly spin test catches wheel noise early. A firm press on each pad shows cracks and flat foam.
Those checks take minutes and prevent bigger repairs.
Verdict: which Medline replacement parts to buy first
Direct answer: buy the part that matches your failed part's size, starting with wheels or arm pads for most owners. The ComsenMed 14 inch arm pad is our top pick for fit range.
Pick the Wiykkur rear wheels if your rear tires are worn. Pick the ForconMed footrests if hinge spacing is 1.46 inches and feet need heel loops.
Pick hanger pins for a lost pin, and steel forks for a bent front caster assembly. For softer arms, pick the HMZ pad.
For desk access, pick the AlveyTech desk length pads.
The AlveyTech 8 inch caster suits only listed Drive models. Check your Medline model number before you order that wheel.
Its pre installed bearings help only when the model matches.
Measure first, order second. That rule gives you the best Medline transport chair replacement parts for your chair, your routine and your budget.
Our top 3 picks at a glance
-
1
Best for full length arm supportComsenMed Universal 14” Full Arm Pad
9.7/10 our score
See it on Amazon -
2
Best for rear wheel replacementWiykkur 12 Inch Wheelchair Wheels Replacement
9.6/10 our score
See it on Amazon -
3
Best for swing away footrestsForconMed Blue Streak Wheelchair footrest Replacement
9.3/10 our score
See it on Amazon
Frequently asked questions
How do I know which Medline transport chair part fits?
Measure the part you are replacing before you order. Check wheel diameter, hole spacing, hinge spacing and stem size.
Then compare those numbers with the replacement.
A part that looks similar can fail to fit if one measurement differs.
Are Medline transport chair parts interchangeable with other brands?
Many are, when sizes match. Transport chairs from Medline, Drive and others share common wheel and arm pad sizes.
Still, measure your chair first.
Universal fit means the size must match, not that every part fits every chair.
Should I replace wheels in pairs?
Yes, replace rear wheels and caster wheels in pairs when you can. Matching wheels roll more evenly and turn more predictably.
It also helps you spot wear on the other side before it fails.
What tools do I need for these swaps?
Most swaps need basic wrenches and a screwdriver. Some parts include bolts or wrenches.
Keep the old hardware until the new part is seated.
Tighten evenly and check for smooth movement after each swap.
About this guide: Our look at Medline transport chair replacement parts draws on maker specs, materials and what owners report. See how we research.



